ASAHOM T-Splitter Compatible with Govee Permanent Outdoor Lights 2/Elite(Model: H705D, H705E, H705F), T-Splitter S1070 S1080 Permanent Outdoor Lights, Black(Type A)

Component Description: Indicator Light: Flashing Green: Pairing mode Solid Green: Successfully paired Button: Press and hold for 10+ seconds to reset Resetting clears all saved T-Splitter settings and returns the device to pairing mode. How to Set up T-Splitter? 1.Connect the T-splitter at the desired branch point. 2.Set the correct number of lights for Out1 and Out2 on the controller. Make sure the lights remain ON. 3.Open the ASAHOM App and tap the “+” icon in the upper right corner to add a T-splitter. 4.After detection, select the brand and model according to your actual product (e.g., ASAHOM S1070). 5.Set the number of LEDs on each branch based on your layout. 6.Wait for about 1 minute, then the lights can be controlled normally.

• Package list: ASAHOM black t-splitter(Type A) x1, adhesive backing x 1.
• Compatible Device: ASAHOM T-splitter for Govee permanent outdoor lights 2/Elite（Model: H705D, H705E, H705F ), T-splitter for ASAHOM S1070 S1080 S1090 permanent outdoor lights. Any other brand/devices are incompatible.
• Innovative T-Splitter: It allows one signal line to drive two separate light branches. It can be connected directly to the controller output to split the signal from Out1 or Out2. Or it can be inserted midway in a light string to branch off and create two independent sections.
• When to Use: When you want to run two light strings in opposite directions from the same controller Ideal for “center-out” layouts on eaves, fences, or rooftops
• Tips: Neither the main output nor any branch output of the T-splitter may exceed 288 LEDs. If the indicator light is distracting, you can disable it via the app.